One brand that I have been super impressed with over the years has been Battle Arms Development. They make some of the slickest, lightweight and functional parts. They are known for their lightweight receivers and hand guards that come in at the higher end of the price spectrum. However, they are lightweight without being skeletonized and kinda generic looking.
Pictured above is one of our “Learning Center” Guns. It is an entire B.A.D. gun built out of some of the best parts they sell. The coolest part about it, is that it weighs under 5lbs. You get some of the best looking receiver sets in my opinion. The designs on them save weight without sacrificing any function.
They make Triggers, buffer tubes, stocks, grips, safeties and even all the other lower parts that you would need. They all are cool designs
We have a ton of their Complete rifles and pistols in stock right now and they are the perfect blend of quality and price. Right now a lot of brands are upping their prices to match the demand. So an entry level gun is going to cost you anywhere from $600-$800. The Battle Arms WorkHorse series of guns, are going to only run you a few $100 more, but you will get a significant upgrade in fit and finish and overall quality of the rifle here.
I still find myself from time to time talking to customers or friends or people in passing who “Love AimSurplus” but don’t know that we have a Showroom!
One of the best features of our company is that we have a Local Showroom where you can pick up your orders, shop or even learn!
Our Showroom is packed full of cool features. We have tons of product that is for local guys only. Things that we don’t have listed on the website so you don’t have to compete with the internet and things selling out before you get there. We have a staff of knowledgeable guys that can answer just about any question you can come in with. But what I would call the best feature is our “Learning Wall”
Our learning wall is known all around the state. We have almost 30 different guns that we assembled that are out on display. Each one has as many popular parts as possible on it so that way anybody who is wanting to handle a product has the chance too. Lets be honest, the grip and stock you like and the one that I like are probably two different things. If you are a new gun guy and don’t have a preference yet, then you don’t know what you like. Thats where our wall comes in. Not sure what grip? Cool, go handle each gun on the wall cause they all have different grips. Wanna see how an optic presents before you pull the trigger on it? Cool, its on a rifle on the wall. Wanna try a Geissele trigger before you commit to spending that kind of cash. COOL, go finger bag all the triggers in the guns. Each one is different!
So check out this video and see what you’re missing out on! Feel free to stop in and say hello or just look around and Ooooh and Ahhh at our Beautiful staff.
225 American Way Monroe OH, 45050
Toss that address into your Waze or Google Maps and we will see ya soon!
We have a bunch of loyal customers. We also have a large amount of local customers that have been shopping with us over the past 20 Years. Whether you are a first time shopper or a Long time Loyal Customer, we just wanted to say THANK YOU!
The support that our customers show us at every step of the way is what keeps us going! We do our best to get new products, keep the best pricing and continue to grow just to give you guys the same support that you give us.
With that being said, we have done our best to get as much product as we possibly can. Right now we have over 50 different kinds of firearms in stock! You would be luck to walk into a big box gun store and find that many right now. Obviously check the website to see the most up to date items at all times, but as of this posting, you’ve got a heads up first before anybody else as to what is there!
If you’re searching for your next gun or your first gun, we have them right now! Don’t miss your chance to grab them while we have them.
Lately we have been listing some of these super cool Lugers on the website 1 at a time. They are super cool because each on is a little more unique than the next. Sometimes when we get trade ins or buy collections the guns generally look the same with similar finish wear in the same spots.
Glocks always have the dominant hand side of the frame rubbed more than the other side. (Officers seatbelts)
Sig 226s always have the front strap rubbed bare from the oils in the hand damaging that thin finish that was on the older Sig Pistols.
Each a little generic if you will. These Lugers all had somewhat different markings on them. Some had Swiss Emblems. Some have no emblem. Some have slightly different emblems and Swiss writings on them. Because of how cool they are, we are listing them one at a time and not all at once. That way we can get accurate and clear pictures of each one that way you can fully appreciate how cool these guns are.
Lugers tend to be pretty pricey now a days because of how rare ones in good condition can be to find. Another cool thing is the caliber that these are chambered in. While most of them were not, these are chambered in .65 Parabellum (.30 Luger) . These guns were not chambered in that round for long. So these are even more difficult to find in general.
With the way guns and ammo are right now we see people trying to get into different corners of the industry. Guys who shoot a lot are looking into new dry fire techniques. Guys who reload are looking at picking up new calibers to load with available components. Collectors are looking to sell off some of their collections to pay for ammo. Everyone is doing something different. If you aren’t already a collector, maybe now is the right time to start? You don’t see guns like these come available too often.
With guns and ammo being difficult to get ahold of right now. We have a large selection of AR15s on the website. Most places are struggling to get inventory in a large amount and we have managed to get a wide variety of calibers, barrel lengths and brands all at once. We have ammo shipments showing up daily so as long as you check the website regularly you should be able to snag you some to go along with that new rifle!
Drop in triggers are nothing new. They have been around for a while now and are arguably one of the best upgrades for a rifle in my opinion. Lots of people try 10 different triggers and pick between a couple to keep in their rifle. However I am a fan of having the same trigger in all of my rifles. That way if I have to pick it up and use it no matter which one it is, I’m comfortable with it and familiar with how it’s going to shoot.
When you have several rifles and want the same trigger in them. Its sometimes difficult spending $280 per Geissele trigger for each one. So that’s where our AimSurplus SSTAT trigger comes into play. These retail for $99.95 and are quite often on sale for even cheaper. We all hate the Mil-Spec triggers with a passion. So these super clean, crisp and simple triggers are an awesome option. With a 3.5lb break and a crispy reset they are hard to argue with. Most other drop in triggers start at the $120 price range and only go up from there. Our SSTAT Trigger does everything those other Drop-ins do, just at a better price.
That makes it easier to buy 3 or 4 of them for all your rifles and not break the bank. You don’t have to worry about your wife seeing a $900 credit card charge and sending you to the dog house or to sleep on the couch. We have several videos on Youtube and our website showcasing how easy it is to install these triggers as well! They always seem to sell out very fast and we can hardly keep them in stock. We even went out of our way to include a Curved model for those of you that are convinced a straight trigger is the work of the devil….
We have 2 new Foxtrot Mike and AimSurplus Exclusive uppers hitting the website. The first one is a 7inch with enough clearance with the Handguard to fit a suppressor. The other 7inch uppers we offer all have the threads tucked inside the Handguard to some extent. That keeps you from running a can unless it fits under the small 1.3in Diameter Handguard. Which is not a lot of cans. We kept that in mind for this specific upper.
This second upper is a 10inch forward charging upper with a “Paratrooper” charging handle. This charging handle folds to the side when not in use to give you less of a snag point. This is something people have been asking Foxtrot Mike to include on the forward charging uppers for a while now. We were able to get them as an Exclusive on this 10inch.
Both of these uppers now come with 3 M-LOK Rail covers included in the box. These are also made by Foxtrot Mike and are a nice addition to keep your hands from getting too hot when you’re out plinking at the range. Plus they look good and super minimalist on the actual upper.
Slate Black Industries is a new line that we picked up in the hopes to carry more products in stock at all times. These guys were able to get us a ton of product and should be able to keep it coming in! These grips and rail covers are excellent for the money and even come in a variety of colors. Head over to the website and check them out now!