Posted on

Great Deal on Billet AR Lower Recivers!


ROYAL ARMS RAK-15 Billet Multi-Caliber Lower Receivers for AR type Rifles.
SPECIAL PRICING, ONLY $119.95! buy here
Here is a smokin’ deal on a quality Billet Lower Receiver. Seriously, these are not much more than a forged receiver. One of my favorite features of this lower is the fact there is no huge logo plastered on the side of it advertising for some company I forked over my hard earned cash too. Nothing but nice clean lines and luxurious, black finish. Beautiful… buy here

Royal Arms manufactures the some of the finest Billet Lower receivers available today. Machined from Solid Billet of Aluminum, not just any grade of bar stock 7075 would do. Royal Arms uses a special blend of 7075 and had it heat treated to their specifications to make it more shock resistance and less prone to failure from fatigue and stress fractures. They then enhanced all the critical areas to make this one of the most durable AR15 Billet lower receivers on the market. It also features a Discreet approach to the logo and firearm information engravings on the bottom of the trigger guard.

Posted on

Magpul MOE SL Furniture in stock and shipping now…

Not going to lie. I was a little confused when Magpul announced the new MOE SL line. The original MOE series of furniture are some my favorite aftermarket accessories, and I did not think you could improve upon them much. When we finally got the SL line in stock I was pleasantly surprised. I don’t think it will replace the original MOE line as much as complement it. All of the parts have been streamlined and thinned down. The new SL Handguard being my favorite. Check them out and buy here!

 
The new Magpul MOE SL line brings a fresh look and new concepts to the classic MOE lineup, featuring sleeker lines and an optimized feature set for modern employment methods.
AS WITH ALL MAGPUL PRODUCTS WE SELL… FREE SHIPPING IN THE 48 STATES! order here

Posted on

NEW GEISSELE MK8 Super Modular M-LOK Rails

Just got the new Geissele MK8 M-LOK Handguards in. as usual, always top kit from our buddies over there… buy here
The Super Modular Rail MK8 with M-LOK Technology was designed to be a lightweight, ergonomic and modular option for the M4 Carbine and all mil-spec AR-15 variants. The MK8 with M-LOK Technology was also designed to do a good job in meeting the ten design specifications for a good M4 weapon rail.

 

1. ERGONOMIC
Instead of four sharp and jagged M1913 rails spaced at 90 degree intervals, the MK8 is fully ergonomic, maintaining its comfortable rounded shape throughout the length of the rail. The rounded top allows the shooter to easily wrap his or her thumb over the top of the MK8 as many shooters like to do with a forward grip.
2. SET-UP IS MODULAR AND FLEXIBLE 
Accessory rails can be attached anywhere along the length of the rail in 45° intervals, including the standard  3, 6 and 9 o’clock positions. The MK8 also includes 2 standard non-rotating QD slots on either side of the rail.
3. FREE FLOATING 
The weapon barrel is completely free floating when an MK8 is mounted. No force is put into the barrel from slings or bipods that could affect point of aim.
4. STRONG
The MK8 is machined from a semi-billet extrusion made from aircraft grade aluminum. A semi billet extrusion is designed with extensive machining stock for 3D features that are machined directly into the rail so that the rail is one integral piece.
5. RIGID 
Current infantry doctrine makes extensive use of accessories that require attachment to a weapon rail. Flashlights, visible and infrared lasers, night vision and thermal sights all require a rigid weapon rail so that zero is not changed when a bipod or sling is used to support the weapon from the rail. The MK8 is a rigid interface for weapon accessories due to its precisely machined proprietary barrel nut and secure rail interface and clamping arrangement.
6. LIGHTWEIGHT 
Use of aircraft grade aluminum and high strength steels in the MK8 give the entire assembly a good strength and performance to weight ratio.
7. ACCESSORY RAILS EASY TO INSTALL 
Utilizing the Magpul M-LOK Technology, accessory rails are easily attached in seconds. The technology also allows the shooter to place accessory rails across slots, allowing even further customized placement of both accessory rails or direct attach accessories.
8. ACCESSORY RAILS ARE SECURELY ATTACHED
With the Magpul M-LOK Technology the special steel rotating nuts are precision machined from 17-4 stainless. The slots on the rail are also precision machined so that the accessory rail, nut and rail all mate together perfectly. Using a short armed hex key, the accessory rail is then locked in place creating a rock solid platform for any attaching of accessories.
9. RAIL ASSEMBLY IS EASY TO INSTALL 
Each MK8 comes with a precision machined, 2-1/4” long barrel nut that is machined from aircraft grade aluminum and hardcoat anodized for a durable surface. The barrel nut requires no indexing, creating an easy and seamless installation. The rail is then slid onto the barrel nut and the precise barrel nut to rail fit precisely aligns the rail to the barrel and is attached via two cross bolts.
10. RAIL IS EASY TO REMOVE 
Just by loosening six screws the MK8 can be slid off the barrel nut for cleaning or gas system maintenance. As quick as it is removed the MK8 is can be re-installed with the precise barrel nut to rail fit maintaining sight and accessory zero.
Posted on

BCM at AIM Surplus

We have slowly been adding to our BCM product line-up over the past few months. Got a bunch of new to us stuff this Friday. While building the ads for them I came across a really neat video on the BCM Compensators hosted by our Buddy Larry Vickers. Check it out vid past the new product links, it’s a quick one.
GUNFIGHTER MOD 0 5.56/223 COMPENSATOR
GUNFIGHTER MOD 1 5.56/223 COMPENSATOR
GUNFIGHTER MOD 0 GRIP
GUNFIGHTER MOD 1 GRIP
GUNFIGHTER MOD 2 GRIP
 

Posted on

BLEM SALE on BLACK FORGE BF15 KRYPTEK CAMO RECEIVER SETS

We have a great deal on some cosmetic blem BLACK FORGE BF15 KRYPTEK CAMO Receiver Sets.
YOU CAN SAVE MORE THAN $100 A SET.


BLACK FORGE BF15 Multi-Cal Receiver Sets. These are High Quality, to Military Specification 7075-T6 Aluminum Receivers with M-4 Feed Ramps and 1913 Picatinny Rail Flat Top. Bullet Pictogram markings on the lower. These Receivers feature minor cosmetic (metal finish) blemish’s that do not affect function. While supplies last…
buy here

Posted on

InExtremis Consulting Firearm Training

We can never stress enough the importance of Firearm training. Responsible Guns owners know how to safely use and manipulate their Firearms. There is no better way to learn and improve yourself as a shooter than to attend a Training Class/Event. Not to mention how much fun they are!
Our Friends over at the INEXtremis Consulting Group have some great training courses and a beautiful private facility. They are also responsible for the Great line of Griffin Armament Products. So check them out!
AIM Customers get 20% OFF Course FEES.
www.inextremisconsulting.com

Training Course Calendar